Shure P3T Single-Channel Half-Rack Wireless Transmitter for PSM 300 In-Ear Monitor System - J13

Dependable wireless transmission and 24-bit digital audio combine in the P3T Wireless Transmitter to deliver a superior personal monitoring mix for every performance. Send two channels of audio to a bodypack receiver up to 300 feet (90 m) away, with patented Audio Reference Companding to ensure transparent sound quality with no artifacts or dropouts. Setup is a snap with the one-touch IR sync that instantly links transmitter to receiver. Rear-panel ¼” TRS balanced inputs and loop outputs provide versatile connectivity to audio sources and other P3T units.

• P3T Half-Rack Single-Channel Wireless Transmitter
• Rackmount and hardware kits
• Detachable ¼-Wave Antenna
• BNC Cable
• BNC Bulkhead Adapter
• Power Supply
• User Guide

• Sends a stereo or mono mix wirelessly to performers onstage
• Detailed, 24-bit digital audio
• Rock-solid analog wireless connection over a 300 foot (90 meter) range
• One-touch IR sync instantly links transmitter to bodypack receiver
• High-contrast LCD screen with audio metering
• Selectable line/aux level
• ¼" (6.3 mm) TRS balanced inputs and loop outputs
• Detachable ¼-wave antenna
• Rack hardware kit included

• RF Carrier Range: 488 – 937.5 MHz (Note: varies by region)
• Compatible Freqeuncies Per Band: Up to 15
• Tuning Bandwidth: 24 MHz maximum (Note: varies by region)
• Operating Range: 300ft (90m)
• Audio Frequency Response: 38 Hz – 15 kHz
• Signal-to-Noise Ratio: 90 dB (typical)
• Total Harmonic Distortion:< 0.5% (typical) (ref. +/- 34 kHz deviation @ 1 kHz)
• Companding: Patented Shure Audio Reference Companding
• Spurious Rejection: >80 dB (typical)
• Frequency Stability: +/- 2.5 ppm
• MPX Pilot Tone: 19 kHz (+/- 1 Hz)
• Modulation: FM, MPX Stereo (ref. +/- 34 kHz deviation @ 1 kHz)
• Operating Temperature: 0° F to 145° F (-18° C to +63° C)
• RF Output Power: 10, 20, 30 mW (Note: varies by region)
• RF Output Impedance: 50 Ohms (typical)
• Net Weight: 27.6oz. (783 g)
• Dimensions (H x W x D): 1.7" x 7.8" x 6.8" (43 x 198 x172mm)
• Power Requirements: 12 – 15 V DC, 260 mA maximum