Catalinbread Talisman Classic Plate Reverb Pedal

Experience the gorgeous, shimmering tone of a plate reverb without the enormous size. Use the high-pass filter to dial in the perfect amount of brightness.

Catalinbread Talisman Plate Reverb
Listen to any recording from the '70s, and you'll most likely hear the sound of a plate reverb, a giant mechanical contraption roughly the size of a bed. It was ubiquitous in the studio, and was the only reverb used on Pink Floyd's iconic Dark Side of the Moon album, for example. What makes plate reverb so cool? It adds lush ambience, dimension, thickness, and depth in an unobtrusive way. When you listen to your favorite albums from the '70s you probably don't even realize how much plate reverb you are hearing. Go back and listen and hone in on the reverb sound and you'll probably be surprised how much reverb is actually there. In the studio the plate reverb signal was often processed on the way back to the console where the things like filtering and delays were applied.

Plate reverb is an artificial effect that utilizes a sheet of metal that vibrates sympathetically with a soundwave that hits it. The basic architecture of a plate reverb unit has a large, thin sheet of metal (nearly 6.5'x3' in the case of the legendary EMT140) that has a transducer at one corner driving the sheet in much the same way as a speaker would, on the other end a pickup to capture the vibrations of the metal sheet, and a mechanical dampener that reduces the plate vibration. The reverb sonically stays out of the way of the dry path due to the minimal initial reflections and a full warm reverb that tapers smoothly fades out into a tail. In the studio, plate reverbs were routinely employed due to the way they added a natural ambience without interfering with the original program material. That and the fact that even though they were nearly 7 feet long and 4 feet tall, plate reverb units were a heck of a lot smaller than a giant room or hall when ambience was needed on recordings.

Features:
- Era-defining plate reverb with studio-style controls
- 479.99% smaller than the leading plate reverb
- The warm quality of the full-bodied reverb naturally tapering off perfectly complements the voice and range of the guitar
- PRE DELAY, delays the reverb by about 100mS
- HIGH PASS, rolls off the low frequencies of the reverb
- Both controls allow you to tune the reverb, in order to keep it from interfering with the dry signal
- Dimensions: (L x W x H) 5 x 3 x 3"
- Weight: 1 lb
- Power Supply: Can be powered with a standard 9V battery, or any center-negative 9V - 18V DC power supply.

Weight, Dimensions, and Manufacturer Part Numbers
Shipping Weight: 1 lbs
Shipping Dimensions: 5 x 3 x 3 in
Manufacturer Part Number (MPN): Talisman

zZounds is an authorized dealer of Catalinbread products.