Tune your PA with dbx's AutoEQ room analysis, feedback suppression, graphic/parametric EQ, compression/limiting, alignment delay and crossover processing.

dbx DriveRack PA2 Speaker Management
The dbx DriveRack PA2 provides all the processing you need between your mixer, and amplifiers to optimize and protect your loudspeakers. With advancements in dbx's proprietary AutoEQ and AFS algorithms, an input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device -- along with updated Wizards -- the DriveRack PA2 continues in the legacy of great-sounding, powerful, and affordable loudspeaker management processors.

AutoEQ
The improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience. With the RTA Mic ""listening"" to your room, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.

Enhanced AFS Feedback Elimination
Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system's tone. Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

Updated Wizard Setup Functions
Updated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date. Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. Helps you easily configure level balancing, AutoEQ, Advanced Feedback Suppression, and provides access to built-in and constantly updating speaker tunings from most major speaker manufacturers.

Available Input Processing
- dbx Compression
- AFS (Advanced Feedback Suppression)
- Graphic EQ
- 8-Band Parametric EQ (adjusted when using the AutoEQ)
- Subharmonic Synthesis

Available Output Processing
- Crossover (supports full range, 2-way, and 3-way systems)
- 8-Band Parametric EQs ( for speaker tunings)
- dbx Limiting
- Driver Alignment Delays

Features:
- Setup Wizard
- Streamlined AutoEQ
- AFS (Advanced Feedback Suppression)
- Mobile Control (Android, iOS, Mac, Windows)
- dbx Compression
- Graphic EQ
- 8-Band Parametric EQ (adjusted when using the AutoEQ) Input
- Subharmonic Synthesis
- Crossover (supports full range, 2-way, and 3-way systems)
- 8-Band Parametric EQs ( for speaker tunings) Output
- dbx Limiting
- Input: (2) line inputs, (1) RTA Mic input
- Input Connectors: (2) Female XLR line inputs. (1) Female XLR RTA Mic input
- Input Type: Electronically balanced/RF filtered
- Input Impedance: >50 kohm
- A/D Converter: dbx Type IV Conversion System
- CMRR: > 45dB
- Mic Preamp Phantom Power: +15V DC (RTA)
- Mic Preamp Equivalent Input Noise (EIN): < -117dB, 22Hz-22kHz, 150 ohm (RTA)
- Output: (6) Line Outputs
- Output Connectors: Male XLR
- Output Type: Electronically balanced, RF filtered
- Output Impedance: 120 ohms
- Max Output: +20dBu
- A/D Dynamic Range: 112 dB A-weighted, 110 dB unweighted
- Type IV Dynamic Range: 123 dB with transient material, A-weighted, 22kHz BW; - 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
- Input Delay Length: 100ms
- Alignment Delay: 10ms per channel (60ms total)
- Sample Rate: 48kHz
- Dynamic Range: >110 dB A-weighted, >107dB unweighted
- THD+Noise: 0.003% typical at +4dBu, 1kHz, 0dB input gain
- Frequency Response: 20Hz - 20kHz, +/- 0.5dB
- Interchannel Crosstalk: < -110 dB, -120dB typical (input-to-output: < -100 dB)
- Operating Voltage: 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
- Power Consumption: 22 W
- Unit Weight: 5.25 lbs. (2.4 kg)
- Shipping Weight: 6.75 lbs. (3.1 kg)
- Dimensions: 1.75"" (H) x 5.75"" (D) x 19"" (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
- D/A Dynamic Range: 112 dB A-weighted, 110dB unweighted

Weight, Dimensions, and Manufacturer Part Numbers
,
Shipping Weight: 7 lbs
Shipping Dimensions: 22 x 12 x 4 in
Manufacturer Part Number (MPN): DRPA2

zZounds is an authorized dealer of DBX products.

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
Model
  • DriveRack PA2 Complete Loudspeaker Management System
Categories

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

zZounds

Oakland, NJ, United States
Sales:79,085
Joined Reverb:2016

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.