AUDIX - MICRO-D

Description française :

AUDIX - MICRO-D - Micro miniature cardio à condensateur pour percu/batterie

Le MicroD d'Audix est un microphone à condensateur équipé d'une cellule hypercariodïde, idéal pour les reprises de toms et percussions, mais aussi les amplis guitares et les instruments acoustiques.
Léger, compact, il est livré avec sa pince DVICE, vous assurant une compatibilité avec les cerclages de toms standards.

Caractéristiques :

• Directivité: Hypercardioïde
• Réponse en fréquence: 40Hz - 20 kHz
• Interrupteur: Non
• Impédance: 250 ohms
• Sensibilité: 4mV
• Réjection Off-Axis: >20dB
• Max SPL: 140dB
• Divers: Livré avec adaptateur d'alimentation APS-910, bonnette et pince Dvice Micro

English description :

AUDIX - MICRO-D - Pre-Polarized Condenser Microphone

The Audix MICRO-D is a pre-polarized condenser microphone designed for many applications including drums, percussion, amplified cabinets, speech, vocals and acoustic instruments.

Used in conjunction with 3 different types of specialized clips and 2 different types of interchangeable capsules the MICRO-D becomes a modular sytem that can fulfill a wide variety of creative needs.

With a smooth uniform response over a frequency range of 40 Hz 20 kHz, the MICRO-D is lightweight, compact, and extremely easy to use. Housed in an aluminum ring and isolated by means of a rubber shock mount system, the stock version of the Micro-D (model ADX20-d) has a hypercardioid pick-up pattern and is capable of handling sound pressure levels up to 140 dB.

The MICRO-D operates on phantom power of 9-52 Volts and is supplied with a phantom power adapter, integral D-vice clamp, cable, windscreen, and carrying pouch. Low noise electronic circuitry and balanced low impedance output allow for interference free performance even with long cable runs.

Features :

• Great for Drums and percussion, Orchestral zone miking, Vocal zone miking, Guitar and Bass cabinets, Cymbals, Saxophone, Brass, Acoustic instruments
• D-vice gooseneck clip (D-vice), Aluminum ring with rubber shockmount (MC20-d), Mic stand thread adapter 3/8 5/8 (TA20-d), 9-52 volt phantom power adapter (APS-910), Carrying/storage pouch included with this microphone
• Lightweight, compact, low profile
• Simple to set-up and use
• Can be used to mic multiple drums at one time
• Fits into tight spaces (between drums, beneath cymbals)
• Optional clips and accessories available
• High SPL Response - The Micro-D features an SPL rating of 140dB. Transient peaks are reproduced without noise and distortion
• Transducer Type: Condenser (pre-polarized)
• Frequency Response: 40 Hz - 20 kHz
• Polar Pattern: Hypercardioid
• Output Impedance: 250 Ohms
• Open Circuit Sensitivity: 5 mV (ref 1k @ 1 Pascal)
• Equivalent Noise Level: 24 dB (A weighted)
• Signal to Noise Ratio: 70 dB (ref 1k @ 1 Pascal)
• Power Requirements: 9 - 52v phantom
• Maximum: SPL 140 dB
• Cable/Connector: 3 pin gold plated male XLR connector
• Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing: Capsule housing is brass, Protective ring is aluminum
• Weight: 2 oz / 57 grams
• Finish: Black E-coat

Please note that we sell European 220/240v versions, most of which can be switched to 110/120v if needed, either directly via the hardware next to the power supply, or via an external power transformer, don't hesitate to contact us if you have any questions.