Line 6 Relay G30 Digital Wireless Guitar System

Break free from your amp and pedalboard -- and rock out without tripping over your cable -- with the low-profile Relay G30 digital wireless guitar system.

Forget About Tripping Over Cables on Stage Forever
Unleash yourself from your amplifier and pedalboard with Line 6's Relay G30 digital wireless guitar system. Unlike analog wireless systems which are notorious for flattening and sucking the energy out of tone, the Relay G30 digital wireless system delivers a full-bandwidth, uncompressed 24-bit digital signal. The G30 preserves the full 118 dB dynamic range of your guitar or bass over a wide 10 Hz to 20 kHz frequency range, so nothing gets lost in translation. Plus, the DSP modeling experts at Line 6 have even added a "Cable Tone" switch to simulate the impedance of a 15-foot or 30-foot guitar cable. Factor in this system's small size and nice price, and the Line 6 Replay G30 is a no-brainer for guitarists looking to go wireless.

Preserve Your Tone with 24-Bit Digital Signal
When guitarists go wireless, they typically miss the great tone afforded by an analog instrument cable. Older analog VHF or UHF wireless systems typically sound less dynamic than audio cables, since they use a process called companding, or compression and expansion, to fit into the frequency on which they're transmitting. The Relay G30 wireless system bypasses the tone-sucking, dynamics-squashing companding process by transmitting a full 24-bit wireless signal. Line 6's exclusive DCL (Digital Channel Lock) technology uses digital handshake technology to make the connection from receiver to transmitter.

Cable Tone Simulation from the Guitar-Modeling Experts
When you plug into a guitar amplifier or pedalboard with an analog cable, your tone is affected by the impedance of that cable. So if you've dialed in your amp's tone settings while plugged in, you may notice your wireless system sounding a little too bright or present in comparison. Take the edge off your tone, and add the sound of your cable back into the mix with the Line 6 Relay G30's built-in cable tone simulator. Just flip the Cable Tone switch on the receiver to put Line 6's DSP expertise to work modeling the sound of a 15-foot or 30-foot analog cable.

Roadworthy and Easy to Transport
How easy is it to transport the Line 6 Relay G30? The transmitter fits easily in a pocket, and the receiver is about the same size as a guitar pedal. In fact, you can mount the receiver inconspicuously in your pedalboard. The Line 6 Relay G30 is made out hard polycarbonate material making it more than roadworthy. Pop two AA batteries into the transmitter for up to 8 hours of battery life.

Features:
- 2.4 GHz digital wireless system with Digital Channel Lock
- Full-bandwidth, uncompressed 24-bit digital signal
- 118 dB dynamic range and 10 Hz to 20 kHz frequency range
- 100-foot line-of-sight operating range
- 8-hour battery life with two AA batteries
- Low-profile, easy-to-transport design

Polycarbonate Stompbox-style System
- Transmission Format: Line 6 proprietary digital audio transmission
- Frequency Response: 10Hz - 20kHz
- Dynamic Range: 118 dB
- RF Carrier Frequency: 2.4GHz
- Compatible Channels: 6
- Transmission Range: 100 feet line-of-sight (may vary due to local conditions)
- FCC Approval: Part 15 approved, no user-license required

TBP06 Transmitter
- A/D Conversion: 24-bit Delta Sigma, 128 times oversampling
- Input Impedance: 1.3 M-Ohm
- Connectors: 1/4-inch unbalanced input
- Controls: Power On/Off, Channel Select
- LEDs Display: Power, Audio Status
- Battery Life: Approx. 8 hours (2x AA alkaline batteries)

RXS06 Receiver
- D/A Conversion: 24-bit Delta Sigma, 128 times oversampling
- Connections: 1/4-inch output
- LEDs Display: Power On, Data Link, Audio Status

Controls:
- Power On/Off
- Channel Select
- Cable Tone Simulator

Power Requirements: DC-1g power supply (9VDC)

zZounds is an authorized dealer of Line 6 products.