ASR-X Analog 8x output expansion card for Ensoniq ASRX Pro sampler World shipping

8 output, compatible analog output card, for Ensoniq ASR-X, ASR-X Pro samplers
I have been providing compatible cards for Roland MV-8000/8800 since 2019. Then cards for MPC4000 / Z8 / Z4. And now time for the Ensoniq ASR-X.
Some info about this card: - 70% factory assembled. The rest hand-build and tested by me
- DACs are PCM5100A. Latest 32 bit capable DACs from TI/Burr-Brown
- Balanced outputs
- Output path are DC coupled, eliminating output capacitors (less components in the audio path, so less color at the output)

Installation is simple. One ribbon cable to connect. The ribbon cable only goes in one way. Comes with the ribbon cable as shown. Mounting screws are included. One photo shows this card inside an ASR-X. Please note that the holes on the ASR-X back panel for the output jacks have small tolerances, and it is a tight fit. You will have to wiggle the card a little to get it through the back panel holes when mounting.

Shipping worldwide.

$28 via airmail to USA, UK, Europe, Canada, Australia, New Zealand, Japan, Asia.

Please be advised that the card still requires manual assembly and soldering by me, as I don't have them 100% pre-made. I do this in my spare time, so I can only ship a few days after an order is placed. I also put each card through a burn-in process overnight, to ensure they will work reliably. Please be patient after payment is made, and allow me to assemble and fully test your purchase before shipping. Thank you.