Free Shipping
from Daly City, CA
Only 1 left
Grab it before it's gone
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn More
VR1 (passive)
Electronics: Passive
Generating Element: Hand-tensioned 2.5µm aluminum ribbon
Directional Pattern: Figure-8
Frequency range: 20 Hz - 18 kHz
Impedance: 300 Ohms
Sensitivity: 1.78 mV/Pa (-55 dB)
Max SPL: 135 dB (0.5% THD @ 1kHz)
Signal to Noise Ratio: 75 dB
Self Noise: 19 dB(A)
Matching Connectors: XLR3F
Power requirement: N/A (phantom-protected)
Dimensions: Length: 33mm (1.30 in.) Width: 19.5mm (0.77 in) Height: 127mm (5.00 in)
Weight: 230g / 8.11oz
The Voodoo VR1 Passive Ribbon Microphone from sE Electronics features a passive ribbon to bring out the edge from your guitar cabs with no muddy highs. It uses proprietary electronics and a long, aluminum ribbon transducer to reproduce signals with a wide frequency response, and pristine detail. The capsule features a figure 8 polar pattern, wide frequency response, and detailed audio response.Ribbon capsule reproduces frequencies from 20 Hz to 18 KHzProprietary design results in full frequency responseTraditional figure 8 polar patternPassive electronics performs as well as condensersUPC: 850426001736In the Box sE Electronics Voodoo VR1 Passive Ribbon Microphone Limited 3-Year Warranty
California Residents:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and/or cause birth defects or other reproductive harm. For more information, go to .. For more information, go to .
| Condition | |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
| Electronics |
|
| Polar Pattern |
|
| Wired/Wireless |
|
| Microphone Type |
|
VR1 (passive)
Electronics: Passive
Generating Element: Hand-tensioned 2.5µm aluminum ribbon
Directional Pattern: Figure-8
Frequency range: 20 Hz - 18 kHz
Impedance: 300 Ohms
Sensitivity: 1.78 mV/Pa (-55 dB)
Max SPL: 135 dB (0.5% THD @ 1kHz)
Signal to Noise Ratio: 75 dB
Self Noise: 19 dB(A)
Matching Connectors: XLR3F
Power requirement: N/A (phantom-protected)
Dimensions: Length: 33mm (1.30 in.) Width: 19.5mm (0.77 in) Height: 127mm (5.00 in)
Weight: 230g / 8.11oz
The Voodoo VR1 Passive Ribbon Microphone from sE Electronics features a passive ribbon to bring out the edge from your guitar cabs with no muddy highs. It uses proprietary electronics and a long, aluminum ribbon transducer to reproduce signals with a wide frequency response, and pristine detail. The capsule features a figure 8 polar pattern, wide frequency response, and detailed audio response.Ribbon capsule reproduces frequencies from 20 Hz to 18 KHzProprietary design results in full frequency responseTraditional figure 8 polar patternPassive electronics performs as well as condensersUPC: 850426001736In the Box sE Electronics Voodoo VR1 Passive Ribbon Microphone Limited 3-Year Warranty
California Residents:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and/or cause birth defects or other reproductive harm. For more information, go to .. For more information, go to .
| Condition | |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
| Electronics |
|
| Polar Pattern |
|
| Wired/Wireless |
|
| Microphone Type |
|
