The Audix TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use, and affordability.
Equipped with a uniformly controlled omnidirectional polar pattern, the Audix TM1 condenser microphone is designed to capture acoustic measurements for room analysis software programs, real time analyzers and other sound control devices. With a flat frequency range of 20 Hz – 20 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts.
Requiring 24 - 48 Volts phantom power for operation, the TM1 features a precision machined 4-stage brass body and capsule housing, nickel plate finish, shock absorbent O-rings. and heavy-duty snap-to-fit mic clip.
The TM1 omnidirectional test and measurement microphone is designed, machined, assembled, and tested by Audix in the USA.
APPLICATIONS - Test and measurement
- Real time analyzers
- Room analysis software programs
- Ambient room mic’ing
Audix TM1 Test and Measurement Small Diaphragm Condenser Microphone Specifications - Transducer Type: Pre-polarized Condenser
- Frequency Response: 20 Hz - 20 kHz +/-2 dB
- Polar Pattern: Omni
- Output Impedance: 200 ohms
- Sensitivity: 6 mV / Pa @ 1k
- Maximum SPL: 130 dB with distortion <1%, 140 dB Max
- Signal to Noise Ratio: 66 dB
- Equivalent Noise Level: 28 dB (A weighted)
- Dynamic Range: 112 dB
- Connector: male XLR
- Power Requirements: 24 - 48 V Phantom Power
- Consumption: 8.9 mA @ 48 Volts
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: 4-piece precision machined brass / Nickel Finish
- Weight: 132 g / 4.7 oz
- Length: 150 mm / 5.9 in