Descriptiopn
As the latest incarnation of the well regarded AT4033 studio and bluegrass mic, the Audio-Technica AT4033a is a large-diaphragm cardioid condenser microphone designed for detailed, clean, low-noise reproduction of vocals and various instruments, making it a versatile tool in project studios and home setups as well as for commercial facilities. The vapor-deposited gold diaphragm is pre-aged to stay sonically consistent over time while the transformerless circuitry minimizes low-end breakup and contributes to enhanced transient response. Additionally, the precision-machined acoustic baffle yields increased stability.
The capsule assembly’s floating construction lessens vibration and a switchable 80 Hz high-pass filter offers at-the-source reduction of rumble and low-frequency buildup. Thanks to the custom shockmount, the AT4033a is further isolated from vibration and stand-borne noise. Since it can take high SPLs without distorting—up to 155 dB with the -10 dB pad engaged—the mic is a great choice for loud instruments in addition to nuanced, intimate performances.
Latest Incarnation of the AT4033
The latest edition of the legendary AT4033 microphone, the side-address AT4033a offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals.
Studio Classic Sound
A studio classic and bluegrass favorite, the AT4033 cardioid studio condenser is the microphone that broke the $1000 barrier in its class. A strong up-front presence characterizes the sonic signature of this 40 Series pro audio classic.
Switchable Settings
The AT4033a's 80 Hz high-pass filter easily switches between flat frequency response and a low-cut filter that diminishes ambient noise and popping with closely miked vocals. The -10 dB pad allows distortion-free pickup of blaring instruments such as drums and guitar amps.
Isolation from External Noise
Thanks to the floating-construction capsule assembly and provided custom shockmount, the AT4033a provides effective isolation from noise and vibration.
Features at a Glance
- Cardioid polar pattern for directional focus and rejection of off-axis sounds
- High maximum SPL of 145 dB (155 dB SPL with -10 dB pad engaged)
- Transformerless circuitry minimizes low-frequency distortion and provides enhanced correlation of high-speed transients
- Precision-machined, nickel-plated brass acoustic baffle provides enhanced element stability and optimal sensitivity
- 2-micron, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
- Floating-construction capsule assembly provides isolation from noise and vibration
- Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
- Surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards
- Custom shockmount provides superior isolation
- XLR 3-pin output connector
- Runs on 48V phantom power
What's in the box
- Audio-Technica AT4033a Large-Diaphragm Cardioid Condenser Microphone
- Audio-Technica AT8449a Microphone Shockmount (Black)
- Microphone Dust Cover
- Protective Carrying Case
- Limited 5-Year Warranty
Specifications
Primary Applications
Studio Recording
Form Factor
Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources
Vocals, Instrument
Sound Field
Mono
Operating Principle
Pressure Gradient
Capsule
Electret Condenser
Polar Pattern
Cardioid
Orientation
Side Address
Circuitry
Solid-State
Pad
-10 dB
High-Pass Filter
80 Hz, 12 dB/Octave
Tone Adjustment
None
Gain Adjustment
None
Indicators
None
On-Board Controls
High-Pass Filter, Pad
Windscreen
None
Frequency Range
30 Hz to 20 kHz
Maximum SPL
145 dB SPL (1 kHz, 1% THD)
155 dB SPL (1 kHz, 1% THD, with Pad)
Impedance
100 Ohms
Sensitivity
-32 dBV/Pa (Open Circuit Voltage)
Dynamic Range
128 dB (1 kHz, at Max SPL)
Signal-to-Noise Ratio
77 dB (1 kHz)
Equivalent Noise Level
17 dB SPL
Output Connectors (Analog)
1 x XLR 3-Pin Male (on Mic)
Headphone Connector
None
Bus Power
None
Operating Voltage
48 V (Phantom Power)
Operating Current Consumption
3.2 mA
Color
Black
Mounting
Shockmount (Included)
Included Case
Hard Case, Mic Sock
Included Filters
None
Dimensions
ø: 2.1 x L: 6.69" / ø: 5.3 x L: 16.99 cm
Weight
13.4 oz / 380 g
Package Weight
3.145 lb
Box Dimensions (LxWxH)
11.55 x 9.85 x 4.25"
THANK YOU!