Unfinished Maple Hxx guitar body - fits Fender Strat Stratocaster neck Floyd Rose J1388

Up for auction is a precision CNCd, unfinished replacement or project guitar body. This body does not have a finish on it. It has been sanded to 220 grit.

Body Wood................  Maple

Bridge Compatibility....  This body will fit either an Original Floyd Rose (OFR) or a Gotoh Floyd Rose (GE1996T)

 Important bridge information-

• The bushing holes are predrilled for OFR style stud bushings (10mm diameter).  A Gotoh type Floyd Rose comes with 11mm bushings.  We can open up the holes to accept the 11mm Gotoh bushings, but you must message us immediately after purchasing if you need the bushing holes opened up.  If we do not get a message from you, the body will ship with 10mm holes.  If you are unsure which bridge you want to use, or forget to message us to open up the bushing holes to accept wider, Gotoh bushings, the Gotoh Floyd Rose will function properly if used with 10mm OFR style bushings.  The Stewmac Part # for the 10mm OFR style Studs and bushings is #2155
  
  
• The use of 32 or 33mm sustain blocks will be required.  The stock, 42mm sustain blocks can technically work, however they will stick out of the back of the guitar and you will not be able to use the spring cavity cover.
  
  
• The use of any other bridge other than an Original Floyd Rose or Gotoh Floyd Rose will likely require modifications by a qualified technician to work.

Pick Up Configuration..... Hum x x (direct mounted configuration- no pickguard required)

Output Jack................. 7/8" Side Mount Output Jack

Neck Pocket................Standard, 2 3/16" width (nominal dimensions), 6 string Fender Strat specs. (compatible with Strat style 21/22 fret, 25.5" scale necks.  ).  Please note that to ensure you have a snug fit with your neck and to ensure plenty of adjustment space for height setup parameters, we purposely cut our neck pockets to the tight and shallow side of tolerance, meaning if you have a neck  in the middle to wide side of heel width tolerance, simple neck pocket adjustments may be required.   This is a feature to ensure an optimized fit of your neck.  We aim for .60-.62" pocket depth (if you need the pocket deeper, we will need to have a discussion before you purchase the body).  The exact pocket width is displayed in the item pictures.  We publish these dimensions so there are no surprises when you receive the body.  If none of this makes sense, or you do not have the resources to do simple neck pocket modifications, you should consult with a qualified and competent technician before attempting to assemble your own guitar.

Weight......................... 4 lbs 14 oz

All wiring holes are predrilled.

No control holes are drilled to allow for customization.

Includes complimentary cavity covers (either clear or matte black).  The body will default ship with  clear covers.  If you would prefer  black covers, you must message us immediately after ordering.  If we do not get a message that you would prefer black covers, it will ship with  clear covers.

Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood.

Bid with confidence! The body you see in the auction is the body you will receive!

The name Fender and corresponding model letters are registered trademarks of FMIC Ltd. Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only.