This is for one Martin RUSH MH6 Wash RGBW miniature moving head stage light fixture in low hour, excellent condition. These are the last 2 fixtures available and will come with brackets and powercon power cables.
Shipping is included only for the lower 48 states. US territories and international buyers must contact for a separate shipping quote before purchasing. Specs from Martin below.
The Martin RUSH MH 6 Wash LED Moving Head Light Wash offers a fully pre-mixed color system from 12 x10 W RGBW LEDs with a spectacular 10° 60° zoom. The Martin RUSH MH 6 Wash LED Moving Head Light offers a fully pre-mixed color system from 12 x10 W RGBW LEDs with a spectacular 10° 60° zoom. Martin RUSH MH 6 Wash also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.
Martin RUSH MH 6 Wash LED Moving Head Light Features:
- 12 x10 W Osram Ostar RGBW LED’s
- Single-lens wash with fully premixed color
- 2,000 lumen output
- 10° 60° zoom
- 32 pre-built color macros
- Temperature-controlled cooling system
- Digital display menu
- PowerCON in and through
- 3 and 5-pin DMX options
Martin RUSH MH 6 Wash LED Moving Head Light Specifications:
Physical:
- Length: 290 mm (11.4 in.)
- Width: 189 mm (7.4 in.)
- Height: 360 mm (14.2 in.)
- Weight: 7.1 kg (15.7 lbs.)
Dynamic Effects:
- Color mixing: RGBW
- Color presets: 36 color presets plus full white, ‘color wheel’ effects
- Electronic dimming: 0-100%, 4 dimming curve options
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic ‘shutter’ effect: Instant open and blackout
- Zoom: Motorized Pan: 540°, Tilt: 270°
Control and Programming:
- Control options: DMX
- DMX channels: 14
- White balance control: RGB adjustment
- 16-bit fine control: Dimming, pan, and tilt
- DMX address setting: Control panel with LCD display
- DMX compliance: USITT DMX512/1990
Optics:
- Light source: 12 x10 W RGBW Osram Ostar LEDs
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- Zoom range: 10°-60°
Construction:
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Ingress protection rating: IP20
Installation:
- Mounting points: One quarter-turn bracket for rigging clamp
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
- Minimum distance to illuminated surfaces: 8″ (200mm)
- Minimum distance to combustible materials: 4″ (100mm)
- Minimum clearance around fans and vents: 4″ (100mm)
Connections:
- AC power in/thru: Neutrik PowerCON
- DMX data in/thru: 3-pin and 5-pin locking XLR
Typical Power and Current:
- 120 V, 60 Hz: 1.6 A, 155 W, PF 0.99
- 230 V, 50 Hz: 0.7 A, 155 W, PF 0.95
- Typical half-cycle RMS inrush current at 240 VAC: 11.3 A Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Electrical:
- AC power: 100-240 V nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Fuse: T 3.15 A
- Recommended Miniature Circuit Breaker*: Type D
- Per IEC 60898/UL489/CSA C22.2 No. 5 Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Thermal:
- Cooling: Forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 0° C (32° F)