Shure AXS4 2000s - Black

Function perfectly. Casing has a few scratches and dents but is in perfect working order.

AXS 4 CONDENSER MICROPHONE The AXS 4 is a professional quality condenser microphone suitable for sound reinforcement and studio recording of acoustic guitar, drums, stringed instruments, and vocals (when mounted on a stand). The AXS 4 has a wide frequency response for natural sound reproduction. It maintains a cardioid polar pattern throughout its frequency range, which ensures high gain before feedback and maximum isolation from unwanted sound sources. Its high sensitivity and low self– noise make it ideal for producing quality demo tapes. Operating voltage is supplied by phantom power or an AA battery. SPECIFICATIONS Type: Condenser (electret bias) Polar Pattern: Cardioid (unidirectional), symmetrical about axis. (Figure 4) Frequency Response: 40 to 18,000 Hz (Figure 4) Output Impedance: 600 Ω Recommended Input Load Impedance: 800 Ω minimum Output Level (at 1 kHz):–48.0 dBV/Pa (4.00 mV) open circuit voltage* *1 Pa = 94 dB SPL Maximum SPL: 131 dB (phantom), 127 dB (battery), 2000 Ω load 129 dB (phantom), 126 dB (battery), 800 Ω load Output Noise: 20 dB typical, A weighted; 24 dB typical, weighted per DIN 45 405 Dynamic Range: 111 dB (phantom); 107 dB (battery), at maximum SPL, 2 kΩ load, to A-weighted noise level Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Phantom Power: 11 to 52 Vdc; reverse polarity protected to 100 Vdc Current Drain: 2.0 mA max at 52 Vdc Battery Power: 1.5 V alkaline AA size (NEDA 15A) recommended Typical Battery Life: Up to 10,000 hours Operating Temperature Range: –29° to 57° C (–20° to 135° F), at 0 to 95% relative humidity. Switch: Built-in On/Off switch Connector: 3-pin male XLR connector Case: Steel and brass construction with black painted finish Dimensions: 191 mm L x 27.9 mm H (7.5” L x 1.1” W) Net Weight: 250 g (8.8 oz), less battery