Superscope a210 High Fidelity 10W Integrated Amplifier

Brand New Superscope A210 High Fidelity 10W Integrated Amplifier. Designed for the serious listener. Comes with AC Power Cord, Owners Manual and 3 metal Pin Style Feet.

Product description The basic concept of thea210 is renewed with a new design. The sound quality and function are also upgraded.

■ Super strong pre-out & headphone output
Both preout and headphones are directly output from the same non-returnable discreet power amplifier as speaker output. This is why the speaker can be driven so it is a super strong preamp/headphone driver.

■ High quality output level
By suppressing the maximum output to a general household use, it is possible to use a transistor (2SA1930/2SC5171) with excellent frequency characteristics, linearity, and compliance accuracy.
Using this single push pull, you can achieve clear, dynamic sound quality.
It is also called a "power amples" method that drives speakers with preout quality.

■Ideal construction & pattern layout
The full-size chassis provides an ideal construction with A-1 polished. The shortest possible current return loop from the transformer to the rectifier circuit, while the ideal shortest placement from the power circuit to the amplified circuit, and the ground pattern is star wired, which greatly improves the reality of the sound and sound of the sound of the earth.

■Direct mechanical ground construction
A spike pin is located directly below the transformer to direct the chassis from damaging transformer vibrations. In addition, the foot of the product is supported by 3 points of spike pins, eliminating the turbidity of the sound caused by the chassis dump, and earning a lively soul.

■ Equipped with a standard metal insulator (when shipped)
This product is made of metal insulators that have been used to replace the traditional standard plastic insulators.
About this Item

• Ultra fidelity fine-tuned sound stage of Power Transistor TO-220, with practical volume !!.
• Wide range Non-Negative Feedback with 120VA R Core Transformer, Fast recovery diode..
• Versatile Amplifier for Pre, Headphone, even Integrated to drive loudspeaker powerfully..
• 1 x Balance, 3 x RCA input terminals..
• 2 x Pre-out 2.0V (10kΩ), Speaker 10Wx2 (8Ω), Headphone 3.0Wx2 (32Ω)..

• Imported from USA (Sizes & Specifications are based on the USA Market).

Output:
Speaker 10W x 2 (8Ω);
Headphone 3.0W x 2 (32Ω);
Preamp 2.0V x 2 (10KΩ)

Total Harmonic Distortion:
Speaker 0.2% (10Hz～100kHz, 3.3W, 8Ω);
Headphone 0.03% (10Hz～100kHz, 200mV, 32Ω);
Preamp 0.05% (10Hz～100kHz, 2.0V, 10kΩ)
Frequency Response:
Speaker 5Hz～350kHz (+0/- 1dB, 1W, 8Ω);
Headphone 5Hz～400kHz (+0/- 1dB, 200mV, 32Ω);
Preamp 5Hz～400kHz (+0/- 1dB, 2.0V, 10kΩ)
Input Sensitivity / Impedance:
Line 1,2,3 - (H) 0.775V/5kΩ / (L) 4.0V/25kΩ;
XLR - (H) 0.775V/10kΩ / (L) 4.0V/50kΩ
Gain:H: 22dB, L: 8dB
S/N Ratio:115 dB (IHF A Network)
Power Consumption:32W (E60065), 16W(Idle)