Rockville BLUAMP 100 Home Stereo Bluetooth Amplifier with USB/Mic Input+RCA Out

BLUAMP SERIES PRODUCT VIDEO:

How to Set up the BluAmp Series Amplifiers:

What's in the Box:

• Bluetooth Stereo Amplifier
• Remote Control
• Owners manual
• Warranty card

Description:

The BluAmp 100 by Rockville is a high quality Bluetooth amplifier that has a ton of power and all the inputs and outputs you need for almost any setup.

Huge Power
The BLUAMP 100 is loaded with 500 Watts of peak power and 120 watts continuous RMS! The built in amplifier is loud enough that when you crank up the volume your neighbors just might complain!

Expandable
This is more than an amplifier. The BLUAMP 100 will be the control center for your home stereo system, or your karaoke system.

There are 2 RCA outputs allowing you to connect powered subwoofer(s) or additional power amplifiers. The RCA input allows you to connect and play back any audio device. You also will get USB playback, SD playback and an FM radio.

Great For Karaoke
There are 2 mic inputs along with echo control, and mic volume controls which makes this perfect for karaoke parties.

Full Function Remote
The remote control that is included will allow you to access all functions of the receiver quickly and efficiently.

Adjustable Equalizer Settings
The adjustable bass and treble controls will allow you to fine tune your music to your taste.

Features:

• Rockville BLUAMP 100 Home Stereo Bluetooth Amplifier
• Plays Bluetooth USB/SD/FM/Aux
• 2 Mic inputs with echo for karaoke
• 2-Channels (Left/Right)
• 4 Ohms: 60 x 2 watts RMS and 250 x 2 watts peak
• 8 Ohms: 45 x 2 watts RMS and 175 x 2 watts peak
• Class A/B circuit with great sound quality
• RCA aux inputs to connect to any audio device
• (2) 1/4" Mic inputs for Karaoke with Echo control and mic volume control
• (2) sets of RCA Audio Outputs to connect to a subwoofer or another amplifier
• Built in Bluetooth with 33 foot range
• 2 sets of binding post speaker output terminals
• Bass/Treble/Mic and Master Volume controls
• FM Radio with Antenna
• Built-in Cooling Fan
• Built-in Pre-Amplifier with low distortion
• Rear Speaker Terminals: binding post outputs for 2 speakers
• LCD Display
• Frequency Response (±3dB): 50 Hz- 20 KHz
• Input Impedance: 10kO
• Input Sensitivity: 300mV
• Output Impedance: 4-8ohm
• Total Harmonic Distortion(THD): =0.5%
• Signal-to-Noise Ratio(S/N): =78dBA
• Bluetooth Version: 5.0
• USB : Supports WAV/MP3/WMA
• 115V/230V switchable
• Unit weight: 6.6LBS
• Unit dimensions: 10.2" x 7.8" x3.2"