Slow Gear Electronics Headphone Amplifier for Pedalboards

BACK IN STOCK!

A complete solution for silent practice or live monitoring made to fit on your pedalboard.

Includes an Aux input on 3.5mm TRS, separate mix knob, only outputs on headphones. Use for connecting a phone/PC for silent rehearsal.

TS inputs and buffered outputs. No Aux on the buffered outs. L input is 1 Meg input impedance for direct connection of a guitar or bass. Buffered outputs are 47 Ohms output impedance. Connect to our M.A.I.D. for balanced XLR outs.

Power comes in via standard boss-style coaxial connector, center pin negative. 100 to 200mA supply depending on headphone impedance. Use up to 12V max for additional headroom. Will drive 8 ohm to 300 Ohm headphones or in ears via 1/4 inch TRS connector.

Physical dimensions are: 4.57 in x 3.0 in x 2.0 in (116 mm x 77 mm x 51 mm) including knob height
Connections include:

• TS stereo inputs. High impedance (1Meg) input on the L channel for direct input of an instrument.
• TS stereo buffered outputs. Guitar only.
• 3.5mm stereo Aux input with mix knob.
• Gain switch for Instrument vs Line level (affects only the headphone output.
• Mono sum switch affects both buffered TS outs and the headphone out.
• Polarity affects R input for buffered R out and headphone out.
• Runs on 9 to 12Vdc only. Needs 100mA to 200mA depending on headphone impedance.
• Output is LOUD, noise is low.
• Pair this with our MAID (Micro Active Iso/DI) for a full pedalboard to PA solution.